Removing a toilet can seem like a daunting task, but with the right instructions, it can be done relatively easily. In this guide, we will walk you through the process step-by-step, including how to remove the toilet bowl and tank, as well as how to disconnect and reconnect the plumbing. Read on for all the details!

What Is A Toilet?

A toilet is a fixture that is used for the disposal of human waste. It consists of a bowl that is connected to a drainage pipe. The bowl is usually made of porcelain, while the pipe is made of PVC or metal. There are many different types of toilets, but the most common ones are the flush toilets and the Gravity toilets.

Toilets are usually installed in a room that is adjacent to the bathroom, but they can also be installed in the basement or the garage.

Why Would You Remove A Toilet?

Photo Souce : The Spruce

There are a few reasons you might need or want to remove your toilet. Maybe you’re replacing an old, outdated model with a new one. Maybe you’re renovating your bathroom and need to access the plumbing. Or maybe there’s something wrong with the toilet and you need to repair it.

Whatever the reason, removing a toilet is not a difficult task. In most cases, you can do it yourself with just a few basic tools.

Comprehensive Guide On How To Remove A Toilet

Photo Source : TheHomeDepot.com

Tools and Materials Needed

• Pliers:  to disconnect the water supply
• Pry bar: to loosen the bolts that secure the toilet to the floor
• Putty knife: to remove any old wax sealant around the base of the toilet
• New wax ring: to create a tight seal when you re-install the toilet
• Screwdriver: to remove the bolts that hold down the toilet
• Wrench: to remove the bolts that secure the tank to the bowl
• Sponge and bucket: to clean up any water or mess
• Toilet auger:  to clear any clogs in the toilet
• Hammer: to break up the porcelain if necessary
• Chisel: to remove the old wax ring
• Crowbar: to remove the toilet bowl from the floor
• Gloves: to protect your hands

Step 1: Shut Off the Water Supply to the Toilet.  Before you do anything, you’ll need to shut off the water supply to the toilet. This is usually done by turning a knob or handle located behind the toilet.

Step 2: Flush the Toilet and Hold Down the Handle.  Flush the toilet and holding the handle down so that the water goes down out of the bowl completely.

Step 3: Disconnect the Water Supply Line from the Toilet.  There will be a water supply line connecting the toilet to the water supply. Use a wrench to loosen and remove this line.

Step 4: Remove the Bolts Securing the Toilet to the Floor.  There are usually two or three bolts securing the toilet to the floor. Use a screwdriver or wrench to remove these bolts.

Step 5: Lift the Toilet Off of the Floor and Dispose of It Properly.  Once the bolts are removed, you should be able to lift the toilet off of the floor. Be careful, as it may be heavy and awkward to carry. Dispose of the toilet properly.

Step 6: Clean Up Any Remaining Water or Waste.  Once the toilet is removed, you may need to use a putty knife or chisel to remove any remaining wax sealant from the floor. You may also need to clean up any water or waste that has leaked out.

Tips On How To Remove A Toilet

 

There are a few tips and tricks that you can use to make it easier to remove a toilet, but it is still going to be a bit of work. But, if you need to replace your toilet or just want to get rid of an old one, here is how to do it:

If you have never removed a toilet before, then you should understand that there are two different types. The first type is the floor-mounted type. This is the most common type of toilet and is generally the easiest to remove. The second type is the wall-mounted type. These are not as common, but they can be found in some homes. They are usually more difficult to remove than the floor-mounted types.

• Make sure that you have a good grip on the toilet before you try to remove it. You do not want it to slip and fall while you are trying to remove it. Once you have a good grip, lift the toilet straight up and off of the flange. If it is stuck, then you may need to wiggle it a bit to get it loose.
• Do not try to rock the toilet back and forth to get it loose. This could damage the flange and make it more difficult to remove the toilet.

Final Thoughts

Well, there you have it! Our complete guide on how to remove a toilet. We hope that this guide was helpful and that you feel more confident in tackling this project yourself. As always, if you have any questions or comments, feel free to leave them below and we’ll be happy to help. Thank you for reading and good luck!